<big id="zwz44"></big>
<track id="zwz44"></track>
      <track id="zwz44"><ruby id="zwz44"><menu id="zwz44"></menu></ruby></track>
    1. <table id="zwz44"><ruby id="zwz44"></ruby></table>

      Electric Clamping Radial Drill TPR-1230

      Electric Clamping Radial Drill TPR-1230
      1. Adopts mechanic switch with forward/ reverse functions and longer service life with low damage.
      2. The arm is made of high-class cast-iron. Arm slide is under strick heat-treatment and grinding.
      3. 3HP motor can provide diverse speed selection under heavy-duty cutting.
      4. The over-load protective devices can secure the operator against injury.
      MODEL TPR-1230 ?
      Dai.of column 300 A
      Distance from column surface to spindle center , Max 1230 D+C
      Distance from column surface to spindle center , Min 330 C
      Travel of spindle head 880 D
      Distance from base surface to spindle end , Max 1360 E
      Distance from base surface to spindle end , Min 467 F
      Elevating height of Arm 620 E-F-I
      Effective area of box table 635x520x415 L×K×H
      Dimension of base 1720x715x185 R×S×Q
      Taper hole spindle MT#4  
      Stroke of spindle 270 I
      R.P.M of spindle (rpm x steps) 50HZ 37-1253x12 steps  
      60HZ 44-1500x12 steps  
      Feed of spindle (rev. x steps) 0.05, 0.09, 0.15x3 steps  
      Main motor (HP) 3(two speed motor)  
      Elevating motor (HP) 1HP  
      Hydraulic clamping motor (HP) 1HP  
      Coolant equipment (HP) 1/8 HP  
      Machine height from floor (Max.) 2670 M
      Base + column height 2070 G
      Net weight (approx)kgs 2100(kg)  
      Shipping weight (approx)kgs 2300(kg)  
      Shipping dimensions (LxWxH) 2030×990×2040  
      Capacity Drilling Stell 42Φ  
      Cast iron 55Φ  
      Tapping Stell 25Φ  
      Cast iron 38Φ  

      Standard accessory

      Adjustment tools (box included) 1 set
      Cooling device (pimp included) 1 set
      Lighting device (fluorescent lamp included) 1 set
      Box-type Work Table 1 set

      Special Optionals/Tilt Tables

      Uni-tilt table tilts s full 90 degress. Calibrated indicator shows degree of tilt has accurately planed top

      Dimensions (L x W x H)

      1. 810*710*610 m/m (Large size)
      2. 510*510*590 m/m (small size)
      1. Lead Screw
      2. Column
      3. Main Motor (3HP)
      4. Electrical Control Box
      5. Hydraulic Pump Motor (1HP)
      6. Hydraulic Flow Distributing Value
      7. Cooling Pump (1/8 HP)
      8. Working Table
      9. Base